notice to operators, maintenance
and cleanup personnel
Model AST--100
page 3 of 8
6
JARVIS
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457-4926
UNITED STATES OF AMERICA
TEL. 860-347-7271
FAX. 860-347-6978
6216002
®
NOTICE TO OPERATORS, MAINTENANCE AND CLEANUP PERSONNEL
ANY MALFUNCTIONING TOOL MUST BE REMOVED FROM SERVICE
REPORT ANY PROBLEMS TO YOUR SUPERVISOR
1. Disconnect
the power in accordance with OSHA’s lockout/tagout procedures (29 CFR 1910.147) be-
fore performing any repair or maintenance.
2. Disconnect
the power -- or have the air hose disconnected -- in accordance with OSHA’s lockout/tagout
procedures (29 CFR 1910.147) before performing any cleanup.
3. Never
put fingers, hands or other parts of the body directly in front of the
AN--10K1 Stunner
.
4. Always
wear eye and ear protection when operating the tester.
5. Always
keep operator’s head a safe distance away and off to one side of the stunner when using the
tester to avoid injury from the stunner’s recoil.
6. Always
keep all body parts away from the stunning rod guide when triggers are activated.
7. Never
squeeze the triggers while inserting the
AN--10K1 Stunner
into the tester. The stunner could
fire if the stunning rod guide is displaced by contact with the tester while both triggers are depressed.
8. Never
make modifications or alterations to the tool.
Replace any missing or illegible labels.
Keep body parts clear
