Pairing Your Headset:
In order to use your Jarv Nmotion Bluetooth Stereo
Earbuds with a Bluetooth-enabled device, you will
first need to pair the two.
1. Place the headset and the mobile phone where they are
easily viewable and no more than one meter apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is turned off (Very important)
4. Press the Pairing button (middle multi-function button)
for approximately 8-9 seconds until the red and blue light
flash alternately which indicates that you are in Pairing
Mode. (Note: A blue light will turn on at first but keep
pressing down the pairing button until it changes to a
flashing blue/red light which indicates that you are in
pairing mode)
5. Activate your mobile phone's Bluetooth pairing function.
6. Set the mobile phone to search for Bluetooth devices
within range and select “Nmotion BTHL-201” from the list of
devices shown.
7. If you are prompted for a Passcode enter “0000” and
press “ok” to pair the headset with your mobile phone.
(Note: If the Bluetooth version of your phone is 2.1, there is
no need to enter the passcode when pairing.)
8. Now you can use your Bluetooth headset to listen to
music, and make and receive phone calls. Some mobile
phones will connect automatically to the Jarv Nmotion
Bluetooth Earbuds when restarted.
