Connection with the Last Paired Device
When powered on, the headset will automatically connect
with the last successfully paired device. If the connection
is successful, it enters standby mode. If the devices fail to
connect within 5 minutes after the pairing has been
initiated, the headset will turn off automatically.
Multi-Connection Mode
1. Pair your first Bluetooth device to the Jarv Mach 1 by
pressing down the multi-function button for approximately
7-8 seconds until the blue/ red light flash alternately and
select “Jarv Mach 1“ from your list of Bluetooth devices
(Refer to “PAIRING WITH YOUR DEVICE” for more details ).
Once the Jarv Mach 1 headset is Connected,
Power OFF
the headset.
2. Pair the second Bluetooth device by pressing down on
the multi-function button for approximately 7-8 seconds to
enter Pairing mode again. Select “Jarv Mach 1” from the list
of Bluetooth devices to connect.
3. Go back to the first Bluetooth device, go to your list of
Bluetooth devices, select “Jarv Mach 1” to connect it.
4. Both Bluetooth devices should now be connected to your
“Jarv Mach 1”
*Please make sure that your headset is fully charged before
using the Multi-Connection mode
Resetting your Bluetooth device
Turn the headset on, simultaneously press and hold down
the " -” and “+” button for 5 seconds or until you hear an
audible beep confirming the reset. This will clear all
settings/memory.
