Your Jarv NMotion Free Bluetooth Earbuds are True Wireless Earbuds
and require that the earbuds be paired individually to your Bluetooth
enabled device firstly and secondly to
each other
in order to
achieve stereo sound from both.
PAIRING THE EARBUDS TO YOUR BLUETOOTH ENABLED DEVICE
1. Begin with both earbuds being powered off and fully charged
2. Place the earbuds and the mobile phone where they are easily
viewable and no more than 3ft. apart.
3. Press and hold down the Pairing button (multi-function button)
for approximately 8-9 seconds until the red and blue LED light flash
alternately which indicates that you are in Pairing Mode.
4. Activate your mobile phone's Bluetooth pairing function, set the
mobile phone to search for Bluetooth devices within range and
select “
NMotion Free L
” and “
NMotion Free R
”
*This process needs to be done separately for each earbud
BOTH
Left and Right
Once each earbud has successfully been paired to your device, the
LED indicator will slowly flash Blue confirming your Bluetooth
connection and your phone should show a connection to each
of the earbuds (L+R) separately.
Please note you must now Pair the earbuds to each other.
PAIRING YOUR EARBUDS TO EACH OTHER FOR TRUE WIRELESS
SOUND (TWS)
1. Press and hold down the button marked TWS for approximately
8-9 seconds until the red and blue LED light flash alternately which
indicates that you are in pairing mode.
This process needs to be
done separately for each earbud (Left and Right).
Once both earbuds are successfully paired to each other you will
hear a beeping sound confirming the True Wireless pairing.
NOTE
: In the event that you cannot get the earbuds to pair properly,
please delete the devices from your Bluetooth connection and begin
at Step 1.
L
R
Pairing
PRESS & HOLD
8-9seconds
TWS
8
