Jarv JRV-SBD1000, Руководство пользователя

Страница: 10 / 16

6) Stride Length Setting
: In the state of time display
(if using the Imperial system), press the
MODE
button
twice, then press the
SET
button for 2 seconds to enter
the stride length interface, press the
MODE
button to
adjust stride length, the range is from 10 to 80 inches,
the stride length will increase by 2 inches increments
when pressing the
MODE
button, default range starts at
24 inches. If using the Metric system, the range is 30 to
200 cm, default range starts at 60cm, and the stride
length will increase by 5cm increments when pressing the
MODE
button. Once stride length has been adjusted
correctly, Press the
SET
button to confirm and exit.
7) Weight Setting
: In the state of time display (if using
the Imperial system), press the
MODE
button 3 times,
then press the
SET
button for 2 seconds to enter the
weight setting interface, press the
MODE
button to
adjust weight, the range is 70 to 250lbs, the weight will
increase by 5lbs increments when pressing the
MODE
button, default range starts at 130lbs. If using the Metric
system, the range is 30 to 120kg, default range starts at
60kgs, and the weight will increase by 2kg increments
when pressing the
MODE
button. Once weight has been
adjusted correctly, Press the
SET
button to confirm and
exit.
8) Displaying Information
: In the state of time display,
press the
MODE
button continuously to display the time ,
steps taken, distance traveled, calories burned and SP
timer. Information shown on the screen will vary as you
press the
MODE
button.
9) Step/Distance/Calorie Tracking Reset
: In the
state of time display, press the
MODE
button once, enter
into the step tracking interface, press the
SET
button ,
and activity tracker will be reset to 0.
10