Wearing your Advantage HR Smart Watch
Jarv Advantage HR Smart Watch + T Heart Rate
I. HOW TO CHARGE YOUR JARV ADVANTAGE HR SMART WATCH / FITNESS TRACKER
II. HOW TO MEASURE YOUR HEART RATE CORRECTLY ON THE JARV ADVANTAGE HR SMART WATCH /
FITNESS TRACKER
1
2
3
4
5
1
2
1
2
3
4
5
Plug the enclosed USB Charging cable directly into your PC USB port, USB wall adaptor (not included) or any similar
electrical source. Charge fully before use. Initial charging time is approximately 2 hours.
Place the watch face up within the charging cradle so that the charging connectors are properly aligned. It is very important
that the charging connectors behind the watch face and inside the charging cradle are properly aligned to each other in
order for the watch to successfully charge.
You should see a battery meter symbol appear on the watch’s display. If you do not see the battery meter appear at first,
please make sure the connectors are properly aligned and press down on the watch face to ensure contact until the battery
meter symbol appears.
Once the battery meter is displayed, hold the watch and charger steady and carefully snap the charger clasp close.
Put the watch/charger down on a stable flat surface. The battery meter will disappear after a couple of seconds, to save
energy, but the watch is still charging. If you pick the watch/charger up, the battery meter will reappear on the display.
Once charging is complete a full battery meter will be displayed on the watch’s display when picked up.
a) On your mobile device, log in to the
i-GotU Life app
b) Select “
Workout
”
c) Select “
Optical Sensor
” under the “Heart
Rate Sensor” sub menu
When using any of the features under the “Heart Rate
Sensor” sub menu, please refer to the instructions on “How
to Wear your Jarv Advantage HR Smart Watch” and select
the mode you wish to use from the “Optical Sensor” option.
For best results, select “
Sports Mode
” -If you select “
Sport/Daily
Mode
” your battery will be depleted within 7 hours
*IMPORTANT:
Make sure connectors are properly aligned and press down
