background image

1

Operation Guide 3358/3368/3798

MA0504-EB

About This Manual

The operational procedures for Modules 3358, 3368 and 3798 are identical. All of
the illustrations in this manual show Module 3358.

Button operations are indicated using the letters shown in the illustration.

All of the displays in this manual show black-on-white.

For the sake of simplicity, the sample displays in this manual do not show the analog
hands of the watch.

Module 3368

Module 3358

Module 3798

Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.

Press     .

Timekeeping Mode

World Time Mode

Countdown Timer Mode

Stopwatch Mode

Alarm Mode

Hand Setting Mode 

General Guide

Press 

C

 to change from mode to mode.

In any mode (except when a setting screen is on the display), press 

B

 to illuminate

the display.

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.

In the Timekeeping Mode, you can press 

D

 to change the display format as shown

below.

Day of week 

Seconds 

Month – Day 

Hour : Minutes 

PM indicator

Press

   

.

Day of the Week

Hour : Minutes

Month – Day

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date.
When setting the digital time, you can also configure settings for summer time
(Daylight Saving Time or DST), your Home City code (the code for the city where you
normally use the watch), the 12/24-hour format, and the illumination duration.

This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the digital time, it is important that you
select the correct city code for your Home City. If your location is not included in the
preset city codes, select the preset city code that is in the same time zone as your
location.

Note that all of the times for the World Time Mode city codes are displayed in
accordance with the digital time and date settings you configure in the Timekeeping
Mode.

After you correctly set your Home City time and date, you can set the watch up for
timekeeping with a different city code simply by changing the Home City code in the
Timekeeping Mode.

To set the digital time and date

1. In the Timekeeping Mode, hold down 

A

 until the

seconds start to flash, which indicates the setting
screen.

2. Press 

C

 twice to move the flashing to the Home City

code setting (see the illustration below), and then use

B

 and 

D

 to select the code you want.

Make sure you select your Home City code before
changing any other setting.

For full information on city codes, see the “City Code
Table”.

3. Press 

C

 to move the flashing in the sequence shown below to select the other settings.

Seconds

DST

Home City Code

Hour

Minutes

Day

Month

Year

12/24-Hour Format

Illumination Duration

Screen

To do this:

Reset the seconds to 

00

Toggle between Daylight Saving Time (

ON

) and

Standard Time (

OF

)

Change the Home City code

Change the hour or minutes

Toggle between 12-hour (

12H

) and 24-hour

(

24H

) timekeeping

Change the year

Change the month or day

Select three seconds or one second as the
illumination duration

Do this:

Press 

D

.

Press 

D

.

Use 

D

 (east) and 

B

 (west).

Use 

D

 (+) and 

B

 (–).

Press 

D

.

Use 

D

 (+) and 

B

 (–).

Press 

D

.

4. When the setting you want to change is flashing, use 

B

 and 

D

 to change it as

described below.

5. Press 

A

 to exit the setting screen.

Resetting the seconds only (without changing the DST, Home City code, hour, or
minute setting) causes the analog minute hand setting to be adjusted to match the
seconds count automatically. If you change any of the other settings, you will have
to adjust the hand setting manually.

See “Digital Time Daylight Saving Time (DST) Setting” below for details about the
DST setting.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.

For details about illumination duration, see “Illumination”.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour
from Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down 

A

 until the seconds start to flash, which

indicates the setting screen.

2. Press 

C

 once to display the DST setting screen.

3. Press 

D

 to toggle between Daylight Saving Time (

ON

 displayed) and Standard

Time (

OF

 displayed).

4. Press 

A

 to exit the setting screen.

The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode to
indicate that Daylight Saving Time is turned on.

Module 3358

Module 3368

Module 3798

DST indicator 

Содержание 3358

Страница 1: ... City code in the Timekeeping Mode To set the digital time and date 1 In the Timekeeping Mode hold down A until the seconds start to flash which indicates the setting screen 2 Press C twice to move the flashing to the Home City code setting see the illustration below and then use B and D to select the code you want Make sure you select your Home City code before changing any other setting For full...

Страница 2: ...s the current countdown You can resume the auto repeat countdown by pressing D or you can press A to reset to the countdown time starting value Countdown Timer Beeper Operations The watch beeps at various times during a countdown so you can keep informed about the countdown status without looking at the display The following describes the types of beeper operations the watch performs during a coun...

Страница 3: ...ime Signal on and off 1 In the Alarm Mode use D to select the Hourly Time Signal SIG 2 Press A to toggle it on ON displayed and off OF displayed The Hourly Time Signal on indicator is shown on the display on the Alarm Mode Hourly Time Signal screen and in all other modes while the Hourly Time Signal is turned on Hourly time signal on indicator On Off status Module 3358 Module 3368 Module 3798 Alar...

Страница 4: ...illuminated This is due to vibration of the EL panel used for illumination and does not indicate malfunction Illumination automatically turns off whenever an alarm sounds Frequent use of illumination runs down the battery Auto light switch precautions Avoid wearing the watch on the inside of your wrist Doing so causes the auto light switch to operate when it is not needed which shortens battery li...

Отзывы: