3
Programming and setting of the hand-held radio transmitter
Technical data and scope of delivery
1 First, use the channel button (for description,in all see Page 1) to select the desired channel on which you would like to program the receiver.
(An illuminated LED in the lower part of the hand-held unit displays the active channel)
2 Now, set the respective radio receiver or wireless motor to the “TEACH” mode and follow the applicable instructions.
3 Within 10 seconds, press the OPEN and CLOSE button on your hand-held transmitter simultaneously and then press the STOP button briefly
. If the “TEACH” process was successful, it is acknowledged by the brief vibration of the tubular motor that is attached to the radio receiver, or
the vibration of the wireless motor Now you can use the OPEN/STOP/CLOSE button to activate the motor on your transmitter.
Individual operation or group activation
The hand-held transmitter TDRCT-04 provides you with the option to operate 4 units individually or as a group via remote control. To do this,
use the channel button to select the desired channel. Subsequently, you can use in the operating keys OPEN/STOP/CLOSE to control the active
channel.
In order to selected the group operating mode, press the channel button several times. As soon as the hand-held transmitter passes the
fourth channel, all 4 LEDs are highlighted. This indicates that all 4 channels are selected and can be operated simultaneous via the OPEN/
STOP/CLOSE function.
In order to switch back to the individual operating mode, press the channel button again and the LED display will switch automatically to the
first channel.
Use the channel button
in order to selected the
active channel
Follow the instruc-
tions and set the
receiver to the
“TEACH” mode
Press the OPEN/CLOSE
button simultaneously
subsequently pressed
Stop
Motor vibrates
Each button must be depressed for approx. 1 second!
