Jaroby Volcan B12 FOGO, Руководство по установке

Страница: 15 / 25

15
•
1-Let the lid in the open
position like the picture
•
2-Once you have measured
the
liquid ethanol
(MAXIMUM CAPACITY
1100 ml), use the funnel to
pour the liquid in the
supply hole.
•
Never fill over the bottom
of the square hole (see
detail C in the picture)
•
3-Wash your hands and
every object used for the
transfer.
STARTING UP
Caution
Before lighting, make sure there is no excess fuel. If there is an excess or spilling of
fuel it must be sponge-up before lighting to avoid fire burns or damages.
• BEFORE THE STARTING UP, check the burner if it’s full otherwise makes
the 3 steps above. After read the following step.
•
Store the fuel container and accessories away from the fireplace in a safe zone.
•
Light-up the ethanol, after the first ignition you might have to do it again to
warm up the burner.
•
Fuel will burn low at first, please allow a minimum of 15 minutes to reach
optimum burn and flame height.
•
Because it contains alcohol, spilling could damage hardwood floors, carpets and
fireplace paint.
•
Always keep a distance of 8 inches (20 cm) between your hands and the burner
NEVER TRY TO LIGHT UP THE APPLIANCE WHILE HOT
Ignition steps
1
Position the lid in open position
using the opening and closing stick.
2
Light-up the burner