25
PREVENTIVE MEASURES AND MAINTENANCE
We recommend to open the air intakes completely and to maintain an intense fire from 10
to 20 minutes per day.
Verify the accumulation of creosote every week that you use the appliance until you
know at which frequency it must be cleaned (minimum once per year).
Remove every creosote deposit in order to prevent chimney fires.
The cleaning of the heat exchanger, of the chimney flue pipe and of the pulling fan, if
necessary, is particularly important at the end of each winter season in order to reduce the
corrosion made during the summer months and caused by the accumulation of ashes (they
must always be in good condition.)
Do not alter or modify the air intakes of the appliance in order to get a stronger fire.
To clean the glasses, J.A. Roby Inc. recommends using products sold for this purpose or
an oven cleaner. Avoid cleaning with abrasives or when the glass is hot.
In case of a glass replacement:
Remove the screws that retain the glasses and then, the fragments of glasses. Check if the
seal cords are damaged.
If so, replace them by a ½ inch ceramics cord and replace the broken glasses by
VITROCERAMICS glasses of 5mm.
Cut the glass edge 3mm smaller on each side, so that the asbestos cord can be slipped on
the edge of the glass at the time of its installation. Fix the glass by screwing it.
Contact your retailer to obtain any information you might need for the replacement of the
glasses.
DO NOT USE SUBSTITUTES.
Содержание ATFM
Страница 20: ...20...
