JARLTECH 8034, Руководство по эксплуатации

Страница: 20 / 48

2 0
C O M M A N D S F U N C T I O N D E S C R I P T I O N
Programming Commands
Cursor Move
CTRL H
CTRL J
CTRL V
CTRL K
CTRL L
Move cursor left
one column
Code: 008
Scroll (line feed)
Code: 010
Move cursor down
one row
Code: 022
Move cursor up one
row
Code: 011
Move cursor right
one column
Code: 012
This is simply the BACK
SPACE function, though
characters are not
deleted as you back
space over them. When
you reach the beginning
of a line, the cursor will
wrap to end of the
previous line until cursor
= 0,0 is met.
This is the LINE FEED
function. It will move
the cursor down one line.
It will always scroll the
screen if at the bottom.
This is an alternative
LINE FEED function
that will not scroll the
screen up one row when
at the bottom line.
This control sequence
will move the cursor up
one row. if it is at the top
of the screen, it will wrap
to the bottom line, the
cursor’s horizontal
location stays the same.
This is RIGHT ARROW
function. It will move
the cursor right by one
character cell. If it is at
the end of a line, the
cursor will wrap to the
next line until the bottom
right hand side is met.