JARLTECH 8010T, Руководство по эксплуатации, Страница: 16 / 52

16
Custom Programming
The programming software uses the following keystroke
short-cuts:
[F2] = Save work at any stage
[ALT+O] = OK (accept entries)
[ALT+C] = Cancel (entries)
[
¯ ¯
¯ ¯ ¯
],
[ [ [ [ [
¬ ¬
¬ ¬ ¬
], [
® ®
® ® ®
], [
- -
- - -
] = Scrolling keys
[TAB] = Skip to next entry
[ESC] = Exit window
[ENTER] = Accept selection, or switch
between enable and disable
If you have a color monitor, you will notice that some letters and numbers
on the screen are bright red. You may scroll directly to those dialog options
by pressing [ALT] plus the bright red letter or number.
NOTE:
your screen (see Diagram 3.1). The screen has three menus:
• FILE: contains routines for creating, opening, closing and
saving files, and for quitting the 8010 program.
• OPTIONS: contains routines for setting operating mode,
RS232 parameters, keyboard wedge parameters, auxiliary
device parameters, card reader parameters, Jarltech
keyboard parameters, and keyboard layouts.
• PROGRAMMING: contains routines for programming
your defined keyboard layout into the memory of the
Jarltech keyboard.