1. Lay base on clean soft surface.
2. Remove top base plate from bottom base plate with wheels. Carefully turn base on side.
3. Install internal mast stem to the top of the bottom base plate by attaching (2) supplied
countersunk bolts under bottom side of bottom base plate. Tighten using hexagon
wrench.
NOTE:
Do not use power drill. May cause damage to base.
4. Carefully turn base upright. Slide top base plate over installed internal mast stem.
2
5
Installing Internal Stem onto JCB101 Base
A S S E M B L Y I N S T R U C T I O N S
Two-person team is recommended for assembly
Internal Mast Stem
Top Base Plate
Bottom Base Plate
IMPORTANT:
It is imperative to install the appropriate base weight. The minimum base weight
recommended for the JCP101 is 100lbs.
M A I N T E N A N C E :
MAINTAINING THE JARDINICO FRAME AND FITTINGS
1. Hose mast and frame with water periodically, more often if installation is in a salty or
industrial environment.
2. Inspect the installation fittings, mount bolts, rib spacers, etc. on a regular basis and
tighten if necessary.
3. Seaside and indoor pool use: Due to demands of both of these environments, Jardinico
recommends weekly or biweekly cleaning with mild soap and water to remove the
concentrated deposits and protect the powder coat finish.
MAINTAINING THE JARDINICO CANOPY FABRIC
1. Clean up spills and stains right away. Spills can be removed by using a clean absorbent
cloth.
2. For general maintenance, use a soft brush to remove dust and dry soil. Wash down with
clean, warm water (i.e., garden hose) every so often to avoid dirt becoming ingrained.
Allow the fabric to air dry before closing the canopy.
3. If a thorough cleaning is necessary, sponge over the fabric using a mild soap solution
(2% solution). Rinse well with plenty of water to remove all soap residue.
4. Never use detergents, cleaning fluids or solvents.
5. Please visit fabric website for more details: www.sunbrella.com
6. Use protective canopy cover during storage or when not in use.
S A F E T Y A N D P R E C A U T I O N S :
1. To reduce risk of personal injury in which a person is injured or harmed, and/or damage
to personal property, read and follow the Assembly Guide prior to assembling and
operating umbrella and base.
2. Close and store the umbrella in windy conditions or when a storm approaches. Never
allow the umbrella to flap in the wind; this could cause personal injury, damage to
personal property, damage to umbrella and/or umbrella canopy.
3. Keep umbrella secured to umbrella base or mount at all times.
4. Do not leave open umbrella unattended. If damage occurs, this is not covered by the
warranty.
5. When adjusting the umbrella, make sure that no person(s), item(s) or personal property
are close to the umbrella. This is important to prevent injury or material damage.
6. Do not allow children to play on or with umbrella or umbrella base.
7. When adjusting or assembling the umbrella or umbrella base, make sure fingers, toes or
any other parts of the body are clear from moving parts. Failing to do so many result in
serious injury.
