Step 4:
Inserting screw (part J ) into the nylon
nuts on drawer sides (A1&A2) and
front (B) by rotating it clockwise.
Step 5
Inserting (G) into the pre-drilled
holes of drawer back (E). make
sure it's open mouth towards the
holes, Secondly attaching left
drawer side (A2) and right drawer
side (A1) to the drawer back (E)
by inserting screw (part J ) onto
the (G) , and then tighten it by
rotating (G) clockwise with
screwdriver, as in diagram 2.
Step 6
Align and insert drawer bottom (F)
into the grooves of drawer sides
(A1&A2) and drawer back (E),
as in diagram 3.
Step 7
Inserting (G) into the pre-drilled holes
of drawer sides (A1&A2), make sure
it's open mouth towards the holes, and
then attaching drawer front (B) to the
drawer sides and drawer bottom, at
last tighten it by rotating (G)
clockwise with screwdriver, as in
diagram 4.
Step 8
Inverting the drawer and tighten it by
using phillips screwdriver and 12 pcs
screws provided. as in diagram 5.
ASSEMBLY INSTRUCTIONS FOR DA616BC / DA616BN
TRUNDLE DRAWER
J
J
DIAGRAM 1
J
DIAGRAM 2
G
E
DIAGRAM 3
F
A1
A2
DIAGRAM 4
G
A1
A2
B
E
E
DIAGRAM 5
Q
