WARNINGS:
*
The DAY BED is not intended for children under 15 months of age or over 50 pounds.
STEP 1:
Detach the front panel (H) from the front posts (F1 & F2) by Allen Key (C).
STEP 1:
Follow step 1 to 3 of the crib assembly instruction.
CAPRI 4-IN-1 CRIB
STEP 3:
Attach the guardrail (D) to the front posts by using bolts (A) and Allen Key (C).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
STEP 2:
Follow step 2 to 3 for the day bed assembly instruction located above
(starting from crib).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP 2:
Move the mattress support (I) to the lowest position by using bolts (B)
and Allen Key (C).
*
Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm)
with a minimum thickness of 4 inches (10cm) but not exceeding 6 inches (15cm).
NOTE: When inserting bolts trun clockwise until tight. Then loosen 1/2-3/4 of a trun. After crib is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate
assembly.
