WARNINGS:
*
The DAY BED is not intended for children under 15 months of age or over 50 pounds.
STEP 1:
Detach the front panel (D) from the front posts (B1 & B2) by using Allen Key (5).
STEP 1:
Follow step 1 to 3 of the crib assembly instruction.
BRADFORD 4 IN 1 CRIB
STEP 2:
Follow step 2 to 3 for the day bed assembly instruction located above (starting from crib).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP 2:
Move the mattress support (E) to the lowest position by adjusting bolts with Allen key (5).
*
Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm)
with a minimum thickness of 4 inches (10cm) but not exceeding 6 inches (15cm).
NOTE: When inserting bolts turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib
is completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to
facilitate assembly.
STEP 3:
Attach the guardrail (F) to the front posts (B1 & B2) with bolts (1). Use Allen Key (5) to tighten
the bolts.
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
1
1
B1
F
B2
1
1
5
