1
For Additional Support Call: 866.393.4202 or Email: [email protected]
· To remove devices from the carts with the greatest
level of charge first, disconnect devices with the
green LEDs first before you disconnect devices with
the blue LEDs.
· Devices that do not feature a USB-C charging port
can be charged using USB-C emulator cables.
(Not Included, contact JAR Systems for more info)
Quick Start
Normal Operation
White: Port Ready
Blue: Device Charging
Green: Charge Level >90%
1.
Connect cart to power source
2.
Plug in powered down devices
3.
Connected devices will automatically charge as
efficiently as possible
4.
Connect/disconnect devices any time
· Plug the power cable into a standard 15A outlet. Be
sure that the power switch on the side of the cart is in
the ON position. LEDs will illuminate white to indicate
the cart is connected to a power source.
· Power off devices fully before connecting them to
the cart for charging.
·
Connect the devices to the USB-C charging cables.
Ensure that devices are placed in the cart so that the
charging ports are as close as possible to the USB-C
charging port on the cart.
Incorrectly connecting
devices can strain the cable over long periods of
time and lead to damage.
· You may hear a clicking sound, and the LED lights
will change color according to the power draw of the
attached devices.
· The system will automatically limit power consumption
by turning some of the USB-C ports off temporarily.
Refer to the device for the level of charge. Connected
devices will charge as fast and evenly as possible, up
to 65W, without drawing too much power.
LED Charging Port Indicator Lights
USB-C Emulator Cables
