Jaquet Droz SW CHRONO, Инструкция по эксплуатации

Страница: 3 / 11

INSTRUCTIONS FOR USE SW CHRONO
B
A
The crown has four
positions
Screwed position
Neutral position
Date-correction position
Time-setting position
Starting the watch
Unscrew the crown to be
in position . This position
enables you to restart the self-
winding movement manually by
turning the crown upwards ( ).
Important note : Do it before
each use (minimum 40 turns).
Setting the time
Unscrew the crown to be in
position . Pull the crown out
to position . Turn the crown
downwards ( ) to move the
hands to the required time.
For accurate time-setting,
ensure that the last adjustment
of the hands is made in a
clockwise direction.
After this operation, push the
crown back to position ; then
turn the crown downwards ( )
to
ensure it turns freely; then screw
the crown back in position .
Important note : In the time-
setting position, do not turn the
crown upwards ( ).
Chronograph pushbutton
functions
A First function:
start the chronograph hand
A Second function:
stop the chronograph hand
B Third function :
return the chronograph hand to
zero, along with the hours and
minutes counters
Correcting the date
Unscrew the crown to be in
position . Pull the crown out
to position . Turn the crown
upwards ( ) until the required
date.
Important note : Once the
time-setting is complete, avoid
manual corrections of the date
while the watch shows the time
between 10 pm and 2 am.
Kindly remember : This watch
is guaranteed water-resistant to
5 bar (50 metres), provided that
the crown is in position .
JD_SW_Chrono_Garantie_2011.indd 3 15.09.2011 16:43:26