jaquar Smart Vapour 0015, Руководство по установке и использованию

Страница: 3 / 12

- 3 -
IMPORTANT !!
Consult the technical data sheet of the
product to be installed.
For the system to operate correctly the feed
water must not contain impurities (sand,
rust, etc.) and must have a pressure ranging
from 1.5 to 3 bar.
We suggest the installation of a 100
micron feed water filter and of a water
softener.
Before positioning the product , it is the
duty of whoever assembles the product to
check that all the connections are watertight.
This guarantee is not valid if there are
leaks after the product has been installed.
SAFETY
DISTANCES
Shower areas, saunas, bathrooms, swimming
pools and the surrounding areas are classi-
fied by EN safety standards as special zones,
since the humidity and dampness associated
with these areas can make them extremely
dangerous.
The standards specify four clearly-defined
areas:
zone 0, 1, 2 and 3.
The omnipolar switch with opening of
contacts of at least 3.5 mm must be located
outside of these zones, distant from possible
contact with water.
The limits of the various danger zones may be
modified by the presence of walls, protective
panels and fixed insulating walls which limit
access to the tub or to the shower plate.
In this case, the area is delimited by taking a
piece of string whose length is that of the area
and winding it around the wall to the opposite
side. The path taken by the end of the string
marks the danger zone.
The zones that are external to the four danger
areas are considered to be normal.
PRECAUTIONS
The material used for the construction of
the product is extremely tough and durable,
which is demonstrated by the widespread use
of this material in many industries.
However, this material may be damaged by
certain chemical substances such as acetones
and solvents in general, and stained by
alcohol-based liquids if these are not removed
immediately.
For this reason, it is advisable to protect the
product with paper or cardboard (the packing
cartons may also be used) during installation,
in order to ensure that no abrasive substances
or paint come into contact with the surface.
It is also advisable to avoid placing tools on
the surface of the product.
Before installing the product, check it
with care.
Any damage of defects found after the
product has been installed will not be
covered by the guarantee.
Immediately on delivery, check that the ap-
pliance is in perfect condition and that the
packaging is not damaged in any way.
When moving the product, always grip the
edges or the frame. Ensure that the pipes are
not damaged when moving the tub.
Never lift or move the product by its pipes
(or by the steam dispenser).
60 cm
60 cm
240 cm
240 cm
225 cm
3
3
2
2
1
0