Japan Radio Co. JLN-740A, Инструкция по эксплуатации

Страница: 113 / 232

6-15 Chapter 6 Setting by Using Menus (JLN-740N/741N)
6
6.2. System setting
Users can check the speed unit, smoothing time and digit of speed.
To select the speed unit, press to alternate “kn” and “m/s”. (see 5.2.1) If you need to change other
system settings, enter the service engineer menu. (see 6.10)
6.3. Language setting
Users can check the language setting.
If you need to select the language between English and Japanese, enter the service engineer
menu. (see 6.10)
6.4. Alert setting
Users can set the Speed alert. Setting item is 1. Maximum speed, 2. Minimum speed and ON/OFF. If
the vessels speed is over then “OVER SPEED STW” alert would occur.
1
Display a main menu by pressing the button.
(normal menu)
2
Select “ALERT” and “SPEED” by using and .
3
Select “MAXIMUM” or “MINIMUM” by using and .
4
When select “ON”, the alert value setting is enable. The value is from -40kn to +40kn.
5
To memory the setting value, select “CONFIRM” by using and .
6
IF set the maximum value to “ON”, “OVER SPEED STW” alert would occur with over
the set value.
ex) Set value:
+20kn alert would occur over 20.1kn forward.
7
IF set the minimum value to “ON”, “OVER SPEED STW” alert would occur with over
the set value.
ex) Set value:
-20kn alert would occur over 20.1kn backward.