Janz Tec emPC-X1600, Руководство по оборудованию

Страница: 5 / 20

emPC-X1600 ( Hardware Manual )
•
Contents iii
About this Manual
This is the hardware manual for the emPC-X1600 embedded PC. It starts with an
introduction to the
emPC-X1600. After that it discusses some topics about installation of the product. The rest of the
manual then covers technical details about the emPC-X1600.
Throughout this manual the term emPC-X1600 also refers to emPC-X1100 when not otherwise
noticed. Both products only differ in the CPU option.
More in depth technical information will be found in secondary manuals, e.g. the ixBus system
reference manual.
Conventions
If numbers are specified in this manual, they will be either decimal or hexadecimal. We use C-notation
to identify hexadecimal numbers (the 0x prefix).
If we refer to low active signal names, they will suffixed by a “#” character.
Some parts of the manual contains notices you have to observe to ensure your personal safety, or to
prevent damage to property. These are visually marked with the following alert symbols:
DANGER
indicates that death or severe personal injury will result if proper precautions are not
taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not
taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that damage to equipment can result if proper precautions are not taken.
indicates information that we think you should have read to save your time by avoiding
common problems. Important suggestions that should be followed will also be marked
with this sign.
Acronyms and Abbreviations
EMC Electromagnetic
capability.
ESD Electrostatic discharge.
FLASH Electrically erasable PROM. Capable of in-circuit re-programming with the capability of
erasing considerably large blocks (in contrast to EEPROM).
NVRAM Non volatile RAM. Storage is ensured by a battery.
Rev. 1.1
© Janz Tec AG