Janz Tec emPC-X1100, Руководство по оборудованию, Страница: 16 / 20

6 - 14 emPC-X1600 ( Hardware Manual )
•
Appendices
©
Janz Tec AG Rev. 1.1
6 Appendices
6.1 Technical Data
CPU
Type X1600 : Intel Atom Z530 X1100 : Intel Atom Z510
Clock Frequency 1.6 GHz 1.1 GHz
Front Side Bud 533 MHz 400 MHz
Hyper Threading Yes No
L1-Cache 32 kB instruction, 24 kB data
L2-Cache 512 kB
Memory
Main Memory 1 GB DDR2
NVRAM 128 KB (auto-backup to EEPROM, no battery needed)
Storage
•
Internal cFast Socket
•
Internal ATA SSD with 4 GB (optional)
Clocks and Timers
Timekeeper (TOY) Yes
Watchdog Timer Yes
Interfaces
Ethernet 1 x 10/100/1000 Mbit/s Ethernet (RTL8111 controller)
1 x 10/100 Mbit/s Ethernet (DM9102D controller)
USB 3 x USB 2.0 high speed interface type-A connectors
•
max 500 mA power supply capability per port
•
max 900 mA for all ports in total
CAN (Option) SJA1000 controller
•
ISO/DIS 11898-2 (isolated from logic),
•
software switchable 120 Ohm termination resistor
Serial Port (Option)
Super IO W83627 (COM1, COM2)
•
RS232 (4 wire)
•
RS485, optionally isolated from logic
Xicor 16V2750 (Port expansion)
•
RS232 (full featured)
•
RS485, optionally isolated from logic
Video
Controller Intel GMA 500, supporting Direct X 9.0E and Open GL 2.0.
Memory Up to 256 MB frame buffer
Interface Dual Display Interface
•
DVI-D connector on front panel, up to 1280x1024.
•
Single channel LVDS on internal connector, up to 1362x768
Expansion
iX-Bus Internal 8/16 bit interface for IO and low speed peripherals
Indicators and Switches
Reset Pushbutton
Status
LED for power supply status (green)
User LEDs 2 programmable LEDs (S0 – red and S1 - green)