emPC-X
(
Hardware Manual
)
•
Safety Instructions
2 - 9
Rev. 1.2
©
Janz Tec AG
2
Safety Instructions
Refer to page iii for explanation of the warning notice system.
The product described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation for the specific task, in particular its
warning notices and safety instructions. Qualified personnel are those who, based on their training and
experience, are capable of identifying risks and avoiding potential hazards when working with these
products.
2.1
Installation and Maintenance
DANGER: Electrical Shock
Danger to life.
This product operates with 9..34 V DC SELV power supply. Do not connect this product
to an improper power supply.
DANGER: Electrical Shock
Danger to life.
The IO interfaces (connectors) of the product are only suited to be connected to SELV
circuits. Use interfaces (connectors) for their intended use only.
CAUTION: Explosive Risk
The installed computer board is equipped with a Lithium battery.
Danger of explosion if battery is incorrectly replaced. Replace only with battery of the
same or equivalent type.
WARNING: Burns Hazard
The product generates considerable amount of heat. The housing transports this heat to
the environment and therefore gets hot.
Caution when touching the housing, burns
hazard
!
2.2
Ambient and Environmental Conditions
DANGER: Explosive Risk
Do not operate the product in potentially explosive atmosphere.
WARNING
This product does
NOT
fulfil the requirements for a fire enclosure according to EN
60950-1 in all possible mounting positions. In these mounting positions, installation is
only permitted above concrete or other non inflammable materials.
CAUTION: Damage
Do not operate the product beyond the specified ambient conditions. Do not cover the
vent slots of the product.
NOTICE: EMI
This product is a class A device. This product may cause radio interference. In this case
the user must take adequate measures.
Содержание emPC-X Series
Страница 6: ......
