AudioControl M6400/M4800/D4600
Control4 Driver User Guide
Janus Technology Ltd
Copyright © 2018
4
Driver Configuration
It is first necessary to create connections for the new driver; chose the Connections pane
in Composer, and then select the Network tab. Double click on the AudioControl device in
the IP Network Connections list and enter the amplifier’s IP address:
Figure 3: Driver Network Connection
Next connect up the inputs, outputs and room control connections as appropriate. Note that
for the D-series drivers, there are multiple sub-devices. The bus inputs can be found on the
Bus A and Bus B sub-devices and the local input, output and room control connections for
each zone on the sub-device for that zone. Any connections with names in square brackets,
e.g. [Zone 1 Bus A In] are managed internally by the driver and should not be changed.
