Mixing Station CLEVER II
with Stirring Device R1900 / R1800
- 14 -
4. OPERATION
4.1 INSTRUCTIONS FOR SAFE USE
MATERIAL
- Follow the instructions and warnings for the material to be mixed.
Material to be mixed can be harmful.
- Avoid splashing mixed material.
- Do not work with materials containing asbestos. Asbestos is considered
carcinogenic.
WORK PROCEDURE
-
The mixer must be firmly fixed.
Loss of control can cause personal injury.
-
Ensure sufficient ventilation when mixing flammable materials to avoid a
hazardous atmosphere. Evaporative gas may be inhaled or be ignited by the sparks
the mixer produces.
-
Keep the cord away from the working area. Always direct backwards the cord
from the device The cord should not be exerted by tensile stress and should not
lie on or pass over sharp edges.
-
Never let the device mix unsupervised. Pull the mains plug and check that the
switch is switched off if the mixer is left unattended, e.g. during assembly and
dismantling work, in the event of a voltage drop, when inserting or installing an
accessory.
-
When parking and stirring the mix, the device must always be secured using the
two castors with brake.
-
Ensure that no liquid splashes against the housing of the mixer.
Liquid that has penetrated the mixer can cause damage and lead to electric shock.
-
Do not reach into the mixing container with your hands or insert any other objects
into it while mixing. Contact with the stirrer may lead to serious personal injury.
- Make sure that the cable is not tangled by the stirrer.
- Do not reach into rotating parts.
- Do not reach into the container with long objects.
- Take material samples only when the device is at a standstill
and the mains plug is pulled.
