Janser 135SH, Инструкция пользователя

Страница: 10 / 23

for Mod.145/155 112 332 000
Grinding Plate
Grit 20 with 6 Rectangular Grinding Stones,
replaceable 75 x 90 mm (3 x 3½”)
For grinding of plaster and levelling compound,
removal of residual paint and gypsum, smoo-
thing of slight unevenness.
Repacement Stone Grit 20
with tapped hole
for Mod.145/155 161 515 003
Stone Disc
Grit 30
For grinding of plaster and levelling
compound.
for Mod.145+155 112 330 030
Stone Disc Grit 30 112 341 041
Spare Parts
Special Glue 112 350 000
Grinding Plate
Grit 16 with 5 truncated,conical stones,
For grinding of screed and hard plaster, asphalt
and concrete. Good grinding rate due to high
total edge measurement of hollow conical stones.
Removes unevenness, soft spots, coatings and
residual filling plaster.
for Mod.145+155 112 346 000
Grinding Stone, Grit 16112 346 001
Replacement Parts
C O L U M B U S
G r i n d i n g m a c h i n e s a n d a c c e s s o r i e s
OPERATING INSTRUCTIONS
10
2 PRODUCT INFORMATION
2.4 Accessories driving discs/brushes/plates
Steel Brush
Wire length 45 mm (1¾”)
For removal of foam backing, adhered resi-
dual underlay and carpet backing for indu-
strial floor cleaning.
for Mod.145+155 112 319 000
Order-No.:
Order-No.:
Order-No.:
Order-No.:
Order-No.:
Order-No.:
Ø 375 mm (14¾”)
Abrasive Disc
metal Grit 14
A thin steel disc with randomly scattered hard-
metal fragments welded to the surface.
For roughing the surface of anhydrite and scre-
ed. Also suitable for levelling off surface irregu-
larities.
for Mod.145+155 112 308 000
Plate with 6 Pot Brushes
For removal of the metallic layer that builds up
between anhydrite and magnesite screed
materials.
Also for the removal of residual foam-backing,
plaster splatter, residual paint coatings etc. and
the removal of adhered underlay.
for Mod.145+155 112 322 000
Pot Brushes 112 321 003
Replacement Parts