Jansen 499.007, Руководство по эксплуатации

Страница: 8 / 48

Page 8 Edition 06/2015
3 Placement, commissioning and disassembly
3.1 Placement of the welding bench
The welding bench is delivered completely preassembled (unpacked) and can be
erected at the workplace, which must comply with the following safety guidelines.
Only startup the welding table on an even, antislip, vibration-free
surface.
Level the foundation using the hinged feet (see Chapter 3.2)
Check the connection and control cable (footswitch) for damage.
Lay the connection cable concealed to avoid the risk of tripping
over it.
Place the footswitch/control cabinet outside of the hazard zone.
Responsibility: instructed personnel
Initial instruction must be provided by personnel from JAN-
SEN or its representatives or by personnel from the com-
pany providing the machine.
These instructed persons are then responsible for instruct-
ing and training other persons.
Operation of the welding bench is forbidden for untrained
staff!