Janome TM30, Инструкция, Страница: 11 / 52

9
LCD Display
NOTE:
Magnetic or electrostatic interference may cause the
LCD display to flicker.
Do not use the machine near appliances that generate
a magnetic field or an electrostatic field such as
microwave ovens.
The LCD display shows following information when the
machine is turned on.
q
Stitch pattern number
Function Keys
Mode key
When the power switch is turned on, the pattern selection
mode is set automatically.
Each time you press the mode key
w
, the green light
r
will shift and the mode
e
will change in the following
order:
(1) Pattern selection mode
(2) Stitch width adjustment mode
(3) Stitch length adjustment mode
w
Mode key
e
Mode
r
Green light
Value set key
Press the value set keys
t
to alter the value.
Press “ ” to increase the value.
Press “ ” to decrease the value.
t
Value set key
q
w
t
r
Selecting Stitch Patterns
(1) Pattern selection mode
The green light
r
is lit at the pattern selection mode.
The stitch pattern number will increase or decrease by 1
each time you press the value set keys
t
.
To select the desired stitch pattern, press the value
set key until the pattern number of the desired stitch is
indicated on the LCD display
q
.
To refer available stitch patterns for this sewing machine,
check the stitch chart in this manual on page 48.
(2) Stitch width adjustment mode
Press the mode key once
w
.
The green light
r
is lit at the stitch width adjustment
mode. The LCD display
q
shows the stitch width or
needle drop position, depending on the selected stitch
pattern.
Press the value set key
t
( or ) to change the stitch
width or needle drop position.
Refer to pages 23 and 26.
(3) Stitch length adjustment mode
Press the mode key twice
w
.
The green light
r
is lit at the stitch length adjustment
mode. The LCD display
q
shows the stitch length.
Press the value set key
t
( or ) to change stitch
length.
Refer to pages 23 and 26.
Press the mode key
w
to return to the pattern selection
mode.
t
t
t
w
q
w
q
r
r
r q
e