Janome Sewist 740DC Скачать руководство пользователя страница 51

Страница: 51 / 68

Gathering

Stitch pattern:

Thread tension dial: 1-4

Presser foot:

Zigzag foot A

Loosen the thread tension to “1” and increase the

stitch length to 5.0.

Pull both threads 4˝ (10 cm) under and behind the

presser foot (refer to page 23).

1/4˝ (0.6 cm)

NOTE:

You may sew the straight stitch under the two

gathering rows to cover the remains of gathering rows.

Sew two rows of straight stitches 1/4˝ (0.6 cm) apart.

Knot the threads at the beginning.

Pull the bobbin threads at the end to gather the fabric.

Knot the threads at the end and distribute the gathers

evenly.

Prepare the fabric to attach the gathering.

Tighten the thread tension to “4” and decrease the

stitch length to “2.4” (default settings).

Place the wrong side of the fabric

under the

gathering.

Sew the straight stitch between the two gathering

rows.

Remove the two rows of straight stitches.

NOTE:

Pull up the bobbin thread and draw a 4˝(10 cm) thread

tail to the back before starting to sew.

Use the thread cutter on the face cover when cutting

the threads (refer to page 26)

Содержание Sewist 740DC





































































Результаты поиска

Содержание Sewist 740DC

Отзывы:

Бренды по названию

Популярные бренды

Janome Sewist 740DC, Инструкция

Результаты поиска

Содержание Sewist 740DC

Отзывы:

Бренды по названию

Популярные бренды