Janome Memory Craft 6300P Скачать руководство пользователя страница 8

Страница: 8 / 69

www.toews.com

Function Buttons

1 Thread cutter button

Press this button after finishing sewing and the machine

will trim the threads.

The LED signal blinks while cutting the threads.

5 Thread Cutter Signal

NOTES:

The auto thread cutter does not work if the presser foot is

raised.

The auto thread cutter will work well with normal sewing

threads #30 or finer.

Use the thread cutter on the face plate to cut the specialized

or thick threads if the auto thread cutter does not work well.

When starting the next seam, pull the needle thread to pick

the bobbin thread up and draw them to the back and under

the foot.

Clean the auto thread cutter mechanism regularly to avoid

malfunction due to built up lint.

Avoid using a paper spool when it begins to empty since it

will not unwind smoothly. It may cause the thread to bunch

or slip when using the auto thread cutter.

2 Up/Down needle button

Press this button to bring the needle bar up or down.

The LED signal will turn on when the needle is down.

The LED signal will turn off when the needle is up.

The machine will stop with the needle up or down depending

on the needle position determined by this button.

The machine will always stop with the needle up after auto

thread cutting or buttonhole stitching.

6 LED signal

3 Auto-Lock button

When stitch pattern 01, 02 or 07 has been selected,

the machine will immediately sew locking stitches

and automatically stop when the auto-lock button is pressed.

When sewing all other stitches, the machine will sew

locking stitches at the end of the pattern being sewn and

automatically stop.

4 Reverse button

When stitch pattern 01, 02 or 07 has been selected,

the machine will sew in reverse while the reverse button is

pressed.

If you press the reverse button when sewing all other

stitches, the machine will immediately sew locking stitches

and automatically stop.

Janome MC6300 Instruction Manual

Janome Professional Sewing Machine

www.toews.com

MC6300 Owners Manual/ User Guide

Содержание Memory Craft 6300P






































































Результаты поиска

Содержание Memory Craft 6300P

Отзывы:

Похожие инструкции для Memory Craft 6300P

Бренды по названию

Популярные бренды

Janome Memory Craft 6300P, Инструкция по эксплуатации

Результаты поиска

Содержание Memory Craft 6300P

Отзывы:

Похожие инструкции для Memory Craft 6300P

Бренды по названию

Популярные бренды