26
Various Utility Stitches
• Basting
q
Stitch pattern :
24
w
Presser foot:
Darning foot P
e
Thread tension dial :
1 to 4
r
Feed dogs :
Down
* Set the manual thread tension at “ 1 to 4 ”.
Attaching the basting foot:
z
Raise the needle.
x
Remove the foot holder by loosening the screw.
c
Attach the basting foot on the presser bar putting the
pin on the needle clamp.
Tighten the screw firmly with a large
screwdriver.
q
Foot holder
w
Screw
e
Pin
r
Needle clamp
How to sew
z
Put some fabric under the foot and press the Up/down
needle button twice to bring the needle thread down
through the hole in the foot. Pull the fabric and thread
to the rear. Lower the presser foot.
x
While pressing down the foot control, hold the fabric
taut.
c
When the machine is stopped after one stitch sewing,
pull the fabric with the thread to the back.
v
Repeat steps 2 and 3 to sew. After finishing sewing, pull
the threads and fabric to the back and cut the threads.
* After sewing, reset the thread tension dial at “ AUTO ”
and raise the feed dogs, slide the drop feed lever to the
left.
q
e
w
r
e
w
r
z
x
z x c v
c
q
w
