Janome MC230E, Руководство по обслуживанию

Страница: 9 / 32

5
MC200E
Adjusting the Needle Drop Position
1. Remove the face cover.
2. Lower the needle to the lowest position by turning
the hand wheel.
3. Loosen the 2 setscrews (A).
4. Move the needlebar supporter and adjust the
position of the needle.
5. Tighten the setscrews (A).
NOTE:
Check and the hook timing and clearance
between nthe needle and hook. Adjust them if
necessary.
6. Attach the face cover.
The needle should be positiioned at the center of the needle plate hole.
Setscrews (A)
Needle bar supporter
Needle plate hole