Janome MC 11000 - Скачать руководство пользователя страница 58

Страница: 58 / 102

Gathering

In addition to the regular gathering stitch, this section

offers you a special stitch for easing sleeve tops.

Easing a sleeve top (Edging contraction)

Sew a pair of lines, 1/8” (3 mm) apart, along the edge

of the sleeve top. Pull the needle threads to contract

the sleeve top carefully, matching it with the armhole

size.

Make sure not to make gathers in the sleeve top.

Basting

Attach the satin stitch foot F or darning foot P-2.

When the basting is selected, the feed

dog will be automatically lowered.

NOTE:

Refer to page 17 for how to attach the darning foot P-2.

To sew

Hold the fabric taut and depress the foot control.

The machine will take one stitch and stop

automatically.

Slide the fabric back for the next stitch.

Straight Stitch

Default

Adjust

3.5

5.00

1.0

Straight Stitch

Basting

This stitch is used for basting zipper tape or fitting of

garments.

Sew in the same way as that of straight stitch sewing.

Содержание MC 11000 -







































































































Результаты поиска

Содержание MC 11000 -

Отзывы:

Janome MC 11000 -, Инструкция по эксплуатации, Страница: 58 / 102

Результаты поиска

Содержание MC 11000 -

Отзывы: