background image

AAASewing.com

15

CAUTION:

Turn off the power switch when
changing needles.

Changing Needle

Raise the needle by turning the
handwheel toward you and lower the
presser foot.
Loosen the needle clamp screw by
turning it counterclockwise.
Remove the needle from the clamp.
Insert the new needle into the clamp
with the flat side away from you.
When inserting the needle into the
clamp, push it up as far as it will go and
tighten the clamp screw firmly with the
screwdriver.
* Check your needles frequently for

barbed or blunted points. Snags and
runs in knits, fine silks and silk-like
fabrics are permanent and are almost
always caused by a damaged needle.

To check the needle

Place the flat side of the needle on
something flat (needle plate, glass etc.).
The clearance between the needle and
flat surface should be consistent. Never
use a bent or blunt needle.

Fabrics

Thread

Light
weight

Midium
weight

Heavy
weight

Crepe de Chine, Voile, Lawn,
Organdy,
Georgette,
Tricot

Linens, Cotton, Pique,
Serge, Double Knits,
Percale

Denim, Tweed,
Gabardine,
Coating, Drapery and
Upholstery Fabric

Fine Silk
Fine Cotton
Fine Synthetic
Fine Cotton
Covered Polyester
50 Silk
50 to 80 Cotton
50 to 60 Synthetic
Cotton Covered Polyester
50 Silk

40 to 50 Cotton
40 to 50 Synthetic
Cotton Covered Polyester

9 or 11

11 or 14

14

16

Janome 7312 Instruction Manual 

Janome Sewing Machine

www.aaasewing.com

Magnolia 7312 Owners Manual/ User Guide

Содержание Magnolia 7312









































Отзывы: