Janome JP760 -, Инструкция

Страница: 14 / 46

12
Threading for bobbin winding
Set the speed control lever at .
z
Hold the thread with both hands and pass the thread
under the thread guide.
q
Thread guide
x
Draw the thread toward you and guide the thread
around the bobbin winding thread guide.
w
Bobbin winding thread guide
c
Pass the thread through the hole in the bobbin
from the inside to the outside. Put the bobbin on
the bobbin winder spindle.
v
Push the bobbin winder spindle to the right.
The indicator will show
.
b
Hold the free end of the thread in your hand and
start the machine.
Stop the machine when the bobbin has been
wound a few layers, and cut the thread close to
the bobbin.
n
Start the machine again. When the bobbin
is fully wound, it will stop automatically.
Stop the machine and return the bobbin
winder spindle to its original position by moving it
to the left, and cut the thread with a pair of
scissors. Remove the bobbin from the bobbin
winder spindle.
NOTE:
The machine will not sew until the spindle has been
returned to the left.
Additional spool pin
The additional spool pin is for bobbin winding without
unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
q
Additional spool pin
w
Spool pin felt
e
Spool pin hole
q
w
z
x
c
v
b
n
q
w
e