JanomeFlyer.com
7
Changing the Presser Foot
CAUTION:
Turn OFF the power switch before changing the foot.
Always use the proper foot for the selected pattern.
The wrong foot can cause the needle to break.
• Removing the presser foot
Raise the needle to its highest position by turning the
handwheel counterclockwise. Raise the presser foot,
and press the lever
q
on the back of the foot holder.
• Attaching the presser foot
Place the selected presser foot so that the pin
e
on
the foot lies just under the groove
w
in the foot holder.
Lower the presser bar to lock the foot into the place.
q
Lever
w
Groove
e
Pin
Removing and Attaching the Foot Holder
• Removing the foot holder
Remove the thumbscrew
q
by turning it
counterclockwise with a screwdriver.
• Attaching the foot holder
Align the hole in the foot holder
w
with the threaded
hole in the presser bar
e
. Fit the thumbscrew
q
into the hole. Tighten the thumbscrew
q
by turning it
clockwise with a screwdriver.
q
Thumbscrew
w
Foot holder
e
Presser bar
CAUTION:
Turn OFF the power switch before detaching or
attaching foot holder.
q
w
e
q
w
e
Presser Foot Lifter
The presser foot lifter
q
raises and lowers the presser foot.
You can raise the foot about 1/4˝ (0.6 cm) higher than the
normal up position
w
for easy removal of the presser foot,
or to help you place thick material under the foot.
q
Presser foot lifter
w
Normal up position
e
Highest position
q
w
e
q
w
e
Elna Lotus Sewing Machine Instruction Manual
www.janomeflyer.com
Lotus Owners Manual/ User Guide
