JMA11967
AVAILABLE FROM YOUR EXPERT JANOME RETAILER
Easy Rolled Hem Change-Over
No need to change the needle plate for
rolled hemming. Just slide the needle plate
setting knob to “R” position to convert the
plate for rolled hemming.
9102
D
9102D Features
Lay-in Thread Dial
The concealed threading path assures stable
sewing results.
Range of Differential Feed Ratio
Stretched edges on knit fabrics are
prevented by setting the differential feed
dial between 1.0 and 2.2.
Puckered edges on woven fabrics are
prevented by setting the differential feed
dial between 0.5 and 1.0.
AUSTRALIA
Janome Australia Pty Ltd.
PO Box 1383, Moorabbin 3189 Victoria
www.janome.com.au
NEW ZEALAND
Janome Sewing Machine Co. (NZ) Ltd.
PO Box 51009, Pakuranga, Auckland 2140
www.janome.co.nz
3 or 4 thread overlocking
Lay through tensions
Built-in thread cutter
Colour coded thread paths
Cutting width 3.1mm – 7.3mm
Easy conversion to rolled hem
Differential feed ratio 0.5 - 2.25
Stitch length 1mm – 4mm
Clip on feet
Differential Feed
The differential feed device is designed to prevent
fabrics from puckering or stretching.
It is simple to operate and can be used to create special
effects like gathering and lettuce leaf edging.
1.0 to 2.2
1.0 to 1.0
1.0 to 0.5
