AAASewing.com
26
9
0
Auto
1
2
3
16
Sensor
Square buttonhole
Machine setting
Pattern
#16
Foot
R: Automatic buttonhole foot
Thread tension
Auto
NOTES: The size of buttonhole is automatically set by
placing the button in the rear of the automatic
buttonhole foot R.
The button holder of the foot takes a button
size up to 2.5 cm (1ý) in diameter.
Make a test buttonhole on a scrap fabrics of
the actual garment.
Use the interfacing on the stretch fabrics.
Raise the needle by turning the handwheel. Raise the
foot and place the automatic buttonhole foot with its
pin just under the groove of the foot holder. Lower the
presser bar to attach the foot.
Groove
Pin
Pull the button holder to the back (A), and place the
button in it. Push back the button holder toward you
(B) to hold the button.
Button holder
NOTE: If the button is extremely thick, make a test
buttonhole. If it is difficult to fit the button through
the test buttonhole, lengthen the buttonhole by
pulling the button holder back to create a gap.
Gap
Pull the buttonhole lever downward as far as it will go.
Buttonhole lever
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
3
4
5
A
B
Janome 6260QC Instruction Manual
Janomesewing machine
www.aaasewing.com
6260QC Owners Manual/ User Guide
