janitza UMG 806, Руководство пользователя и технические данные

Страница: 46 / 92

46
UMG 806 www.janitza.com
9.7 Examples of energy measurement
Active energy applied
EP = 30.784 kWh
Active energy deliv-
ered
EP- = 50.430 kWh
Reactive energy
applied
EQ = 7.364 kvarh
Reactive energy
delivered
EQ- = 8.000 kvarh
Energy values can be reset by the user!
9.8 Examples of power quality
Total harmonic distor-
tion of the voltage
THD U L1 = 0.1 %
Total harmonic distor-
tion of the current
THD I L1 = 0.7 %
The meter measures
·The harmonic distortion of current and voltage
·Harmonics up to the 31st
·intermediary harmonic which can be read out via
the communication interface
9.9 Example of time display
Date and time are dis-
played
October 11, 2017, 13h
28m 58s
9.10 Example of active EI1 module
1st analog input
Id1 = 18.00 mA
Relay output status
"12" means 2 relay
outputs. When a num-
ber blinks, it means
that the relay of this
output is active.
9.11 Example of active ED1 module
Status of the digital
input
"1234" means 4 digital
inputs. When a num-
ber blinks, it means
that a signal is present
at the corresponding
input.
Relay output status
"12" means 2 relay
outputs. A blinking
number means that
the relay of this output
is active.
The measurement device is equipped with a power
supply unit. No external power supply is required
for the digital inputs.
The relay outputs have 2 operating modes:
·Remote control
·Alarm when limit values are exceeded
Settings must be made in the configuration menu
for each relay output!