17
www.janitza.de
Procont
®
-LMC-008-IO
6.2
Connecting to the master
For the connection to the load management
device (master module), the station number and
the assignment of the outputs to the load groups
must be set. The station number is consecutive in
a bus, starting with 1 at the master module (LMC/
LMC-Lite).
A connection via TCP/IP (optionally available) also
requires the input of the IP address of the master
module. The expansion module must be in the
same subnet as the master module.
Fig. "TCP/IP Connection".
1.
Patch cable
LMC(-Lite)
PC
Switch/Router
LMC-008-IO
2.
LMC(-Lite)
LMC-008-IO
Patch cable
Patch cable
