www.janitza.de
JPC 100-WEB
11
6.
Introduction to operation
To access the measurement devices via
the user interface, they must be connected
(described in 5. on page 10) and integrated
(described in 9. 1. on page 22 and 9. 2. on
page 24).
1
Settings
menu (depending on the user role, this menu is labeled
Administrator
,
Read only
or
Operator
)
2
Menu bar
3
Selected master device
4
Measured value overview of the selected master device
5
Overview of slave devices
Fig. 09: Start page
The JPC 100-WEB user interface is divided
into three menus:
Start Page
,
Settings
and
Alarming
. These can be called up via the
corresponding button in the menu bar (
2
).
2
1
3
4
5
