janitza FBM Series, Руководство пользователя

Страница: 7 / 28

FBM-Serie
7
Establishing communication to the measurement device
In order to set the Emax parameters, the first step is establishing the communication between the
measurement device and a computer. We recommend installing the configuration and evaluation
software „GridVis“. The measurement device should be assigned an IP address, the entry of the
IP address is different for display devices and mounting rail devices. The IP address helps identify
the measurement device in an ethernet network.
Setting the IP address on a UMG604 / UMG605
1. Simultaneously press key 1 and key 2 one second
2. You are now in the parameter menu.
The letters PRG identify this menu.
C
Note!
Key 1: Change segment selection
Key 2: Change value (long - / short +)
The following parameters must be parameterized for the Emax function on the device:
Parameter Designation Parameter
recommendation Settings
205 TCP mode 0 Fixed IP
203 RS485 mode 1 Master
202 RS485 baud rate 2 38,4 kbit/s
200 Device ID >33 >32
300 IP Adresse XXX --- --- --- 192 *
301 IP address --- XXX --- --- 168 *
302 IP address --- --- XXX --- 001 *
303 IP address ---.--- --- XXX 010 *
304 IP mask XXX --- --- --- 255 *
305 IP mask --- XXX --- --- 255 *
306 IP mask --- --- XXX --- 255 *
307 IP address ---.--- --- XXX 000 *
*Parameters can be freely selected or parameterized according to recommendations