Janitor JV500, Руководство пользователя

Страница: 5 / 11

JANITOR JV500 9 JANITOR JV500 8
8. Ensure the appliance is switched off before unplugging.
9. Do not handle or operate the appliance with wet hands and follow electrical
safety precautions at all times.
10. Extreme caution should be exercised when using the appliance on stairs.
11. Do not attempt to change the attachments while the appliance is plugged in to
Mains power supply. Switch off and remove plug from Mains power supply. Use
only manufacturer’s recommended accessories.
12. Do not operate the vacuum cleaner too close to the heaters, radiators and other
hot surfaces.
13. Do not use the appliance to pick up flammable items or combustible liquids (i.e.
petrol, hot ashes cigarettes, matches, explosive materials or anything burning) or
use in areas where such substances and items may be present.
14. Do not use the appliance to pick up toxic materials (i.e. chlorine bleach, ammonia).
15. Ensure the appliance is disconnected from the Mains power supply before
connecting the hose to the unit.
16. Do not operate or use the appliance without the dust bag and/or filters in place.
17. Before vacuuming, remove any large or shaft objects from the floor or cleaning
surface in order to prevent damage to the filter.
18. If the air inlet, floor head or the 2-piece rod is blocked, switch off the cleaner
straight away and remove from the Mains power. First clear the blocked object
before attempting to start the cleaner vacuum again.
19. Do not leave the appliance unattended when it is connected to a Mains
power supply.
20. Before carrying out any maintenance service or cleaning the filters, always
switch off the vacuum cleaner and disconnect the plug from power supply.
21. Keep ends of the hose, 2-piece rod and other openings away from your face
and body.
WARNINGS
Assembly
Always switch Off your Backpack and remove the plug from the Mains power supply
before cleaning your appliance, assembling, when not in use or attempting any
maintenance task.
Connecting the hose
1. To fit the hose, insert into the hose inlet at the top of the
backpack. Turn the hose end until it locks into place.
2. To remove the hose, twist the hose end until it loosens.
Fitting the 2-piece rod and floor tool
1. Connect the 2-piece rod together
(A).
2. To fit the floor tool to the rod, gently insert the rod into the
top of the floor tool as shown (B).
3. To fit the rod to the handle, gently insert the end of the
handle into the top of the rod (C) .
Carpet Hard Floors
A
B
C
NOTE:
The Gulper floor tool is ideal for
cleaning on carpets and hard floors.