Janich & Klass XINO S700 Series Скачать руководство пользователя страница 13

Страница: 13 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 1-3

XINO

S700

General information

Chapter

1.3

Used symbols

1.3.1

Danger symbols

This sign combined with the signal word "

DANGER!

" indicates a hazardous situation

which, if not avoided, will result in death or serious injury.

This sign combined with the signal word "

WARNING!

" indicates a hazardous

situation which, if not avoided, could result in death or serious injury.

This sign combined with the signal word "

CAUTION!

" indicates a hazardous situation

which, if not avoided, could result in minor or moderate injury.

This sign combined with the signal word "

NOTICE!

" indicates a situation which, if not

avoided, could result in property damage.

This sign indicates hazards due to electrical current.

This sign indicates hazardous situations with a limb crush hazard.

1.3.2

Prohibitive symbols

It is prohibited to wear long hair untied in the marked area.

It is prohibited to wear jewellery (long necklaces, pendants etc.) in the marked area.

It is prohibited to reach into the marked area.

It is prohibited to wear ties in the marked area.

Содержание XINO S700 Series






















































































































































Результаты поиска

Содержание XINO S700 Series

Отзывы:

Бренды по названию

Популярные бренды

Janich & Klass XINO S700 Series, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание XINO S700 Series

Отзывы:

Бренды по названию

Популярные бренды