18
STRA
TA PLA
TFORM
To install the platform, read the instruction manual for
your vehicle, which will indicate which seats are compa-
tible with the platform. The Strata platform is compatible
with the ISOfix classes C, D and E.
The anti-rotation leg (2) is very important for safety, adjust
it properly so that it is supported by the floor of the vehi-
cle. If the supporting surface for the leg is not the actual
vehicle chassis (a storage compartment for example) do
not install the platform on this seat.
1. Installing the platform
in the vehicle
1a -
1b -
1c -
1d -
1e -
1f -
Place the platform on the vehicle seat with the anti-rotation leg
(2) and the Strata fastening guard (10) unfolded.
Take the ISOfix fasteners out (3) turning the button (5) on the
front of the base.
Guide both fasteners (3) towards the ISOfix axles of your vehicle
and press until both sides are locked into place. Two green signals
will appear on the release buttons (4) indicating that they are
correctly fastened. If one or both indicators are red, try it again.
Adjust the height of the leg (2) so that it is supported by the floor
of the vehicle.
Removing the platform
Loosen the platform by turning the button (5).
Release the ISOfix fasteners by pulling the buttons (4), the button
indicator will turn red. Remove the platform.
To fold the anti-rotation leg, pull downwards and turn it.
Choosing where
to install it
1g -
Содержание StrataPlatform
