JANE Montecarlo R1, Инструкция по эксплуатации

Страница: 24 / 132

24
MONTECARLO R1
GENERAL INSTRUCTIONS
In order to correctly protect the child and ensure he is comfortable
and secure in the vehicle it is necessary to follow the instructions
below:
• Your MONTECARLO R1 car safety seat has been designed to be in-
stalled on the back or front seat of your vehicle, provided the car is
fitted with 3-point seat belts. However, we recommend that when-
ever possible you install the safety seat on the back seat of the car,
as this position provides maximum safety.
• It is only suitable for vehicles that are fitted with automatic 3-point
seat belts, that are approved under Standard ECE-16 or other equiva-
lent standards. DO NOT use the safety seat with a 2-point seat belt
as this would be very dangerous in the event of sharp braking or
an accident.
• In some vehicles the buckle strap of the seat belt can be positioned
quite far forwards and may come into contact with the edge of the
booster seat, which makes the position unsafe. In this case, try mov-
ing the vehicle seat forwards or installing the safety seat on another
seat in the car.
• Not all safety systems are exactly the same, which is why we recom-
mend you try your MONTECARLO R1 out in the vehicle in which it
is going to be used.
• It is very important not to use second hand products, because JANE
can only guarantee complete safety of products used by the original
buyer.
• JANE recommends you replace your MONTECARLO R1 car safety
seat with a new one if it has been subjected to a lot of strain in
an accident.
• Check that all the belts are correctly positioned and fastened to your
MONTECARLO R1. Make sure that no belt is twisted.
• Make sure the child understands that he should never play with the
seat belts or fasteners.
• The MONTECARLO R1 safety seat has been designed for use in the
car and should not be used out of the vehicle.
• For more information on the use and installation of the MONTE-
CARLO R1 consult our web page www.jane.es.