JANE Matrix Light 2, Инструкция по эксплуатации

Страница: 23 / 72

english
23
GENERAL INSTRUCTIONS
Your MATRIX LIGHT safety seat can be installed in both the front
seat, if it does not have an airbag, and in the back seat of your car.
Either way, we advise you to install it in the back seat. If you posi-
tion it in the front seat of the car, this must NOT have an AIRBAG,
or the airbag must be disconnected.
It is only suitable for cars fitted with three anchoring point au-
tomatic belts, approved according to Regulation ECE-16 or other
equivalent rules. DO NOT use with a two anchoring point belt.
Not all safety systems are exactly the same, so we advise that you
check your MATRIX LIGHT in the car in which it is going to be fit-
ted.
It is very important not to use second-hand products, as JANÉ can
only guarantee complete safety with items used by their first bu-
yer.
JANÉ recommends that you replace your MATRIX LIGHT safety
seat with a new one if it has been subjected to violent stresses
in an accident.
Check that all the straps are in the correct position and duly adjus-
ted to your MATRIX LIGHT. Make sure that none of the straps are
twisted. The child must understand that he must not play with the
straps or fasteners under any circumstances.
For your baby’s proper development, we advise you not to over-
use the safety seat in the seated position on long journeys. Let
the baby rest frequently in a Moses basket or bed in the reclining
position.
In order to protect your baby adequately and to ensure their comfort and stability in the car, the following instruc-
tions must be strictly followed: