*Pressing MENU will return display to the previous screen.
H0295900-
L1043
EXAMPLE OF SET UP FOR RS CONTROLS
Step 1:
With the Control set to OFF, switch to the “hidden menu”
by pressing MENU, followed by POOL & SPA, holding all
three buttons simultaneously for 7 to 10 seconds.
Step 2:
Press the DOWN button until the screen reads REMOTE*.
Step 3:
When REMOTE is displayed, press the MENU button.
Step 4:
Press either the UP or DOWN button to change
the display to HI-LO-COM (3 wire) or T-STAT (2
wire connection).
Step 5:
Press MENU to select.
Step 6:
Press POOL or SPA to return to the normal screen.
Set Point Lockout
Make sure the control is in the ON mode (POOL or
SPA), press and hold the Up and Down buttons for
7 - 10 seconds. The set point will be locked and the
control will operate in the mode it was in when the Set
Point Lockout occurred. If an attempt to change the set
point is made while the control is in Set Point Lockout,
the control will display SET POINT LOCKED. To unlock
the Set Point Lockout, press and hold the UP and DOWN
buttons for 7 - 10 seconds. The unit will display SET POINT
UNLOCKED.
