Page 4
Jandy
®
Infinite WaterColors
™
LED Light Controller | Spare Parts Installation Manua
l
•
FOR USE ONLY ON A BRANCH CIRCUIT PROTECTED BY A CLASS A TYPE GROUND
FAULT CIRCUIT INTERRUPTER.
•
DO NOT CONNECT TWO OR MORE POWER SUPPLIES IN PARALLEL.
•
LANDSCAPE LIGHTING SYSTEMS ARE FOR OUTDOOR USE ONLY.
•
NOT FOR USE IN DWELLING UNITS.
•
DO NOT MOUNT POWER SUPPLY OR LUMINAIRES WITHIN 3 m OF A SWIMMING POOL
OR SPA.
•
RISK OF FIRE, DO NOT PLACE INSULATION UNDER TERMINAL PLATE.
•
CHECK CONNECTION AFTER INSTALLATION.
•
LIGHTED LAMP IS HOT!
CAUTION
This device is intended for use with permanent swimming pools and may also be used with
hot tubs and spas if so marked. Do not use with storable pools. A permanently installed
pool is constructed in or on the ground or in a building such that it cannot be readily
disassembled for storage. A storable pool is constructed so that it is capable of being
readily disassembled for storage and reassembled to its original integrity.
CAUTION
SAVE THESE INSTRUCTIONS
Verify you have all necessary parts (see Table 1, below.)
KIT PART NO.
COMPONENT DESCRIPTION
QUANTITY
R0979800
Transformer Replacement Kit
1
R0979900
PCBA with Bracket
1
Screws
2
R0980000
Lid w/ Foam and Label
1x screw
R0980100
Screws (10 pack)
1
Table 1.
Replacement Kit Parts
