manualshive.com logo in svg

Jandy AquaLink RS, Руководство пользователя

Поделиться
Скачать
Jandy AquaLink RS Скачать руководство пользователя страница 21

Page 21

5.7  Auto Shut-off Menu 

The AUTO SHUT-OFF feature of the handheld remote can be set to a two (2) minute, five (5) minute, or 
ten (10) minute shut off. The display can be re-enabled by pressing the Power ON/OFF button.

NOTE

  To conserve the batteries the PDA default is set to two (2) minutes.

5.7.1  To change the Auto Shut-off Time 

Highlight MENU and press SELECT. Highlight PDA OPTIONS and press SELECT. Highlight SET AUTO-OFF and 
press SELECT. Use the UP/DOWN arrow keys to set the time out value. Then press the SELECT button to continue.

5.6 AquaPure

®

 Menu

NOTE

  This equipment may not be part of your system. Please check with your installer.

AquaPure chlorine generator systems exclusively communicate with the AquaLink

®

 RS. The AquaLink

®

 RS PDA 

handheld remote will display % of chlorine output. This menu item will only appear when an AquaPure chlorine 
generator is connected to the AquaLink

®

 RS system. If the system is for pool only/spa only configuration (Models 

PDA-P4 and PDA-P8) a single setpoint screen will be displayed. If the system is for pool/spa combination 
configuration (Models PDA-PS4, PDA-PS6 and PDA-PS8) a dual setpoint screen will be displayed.

5.6.1  To set the AquaPure

®

 Output Percentage (%)

Highlight MENU and press SELECT, highlight SET AQUAPURE

®

 and press SELECT. Use the UP/DOWN arrow 

keys to change the percentage. A single setpoint screen will appear for Pool only/Spa only configuration or a dual 
setpoint screen will appear for for pool/spa combination configuration. 

See Section 5.11 for BOOST options.

NOTE

  When the chlorine generator output percentage is set to a value greater than 0 and the filter pump is on, the system 

salinity level and output percentage appears on the equipment status screen.

MAIN MENU

BOOST

HELP

PROGRAM

SET  TEMP

SET  TIME

SET AQUAPURE

PDA OPTIONS

SYSTEM   SETUP

SET AQUAPURE

SET  TO  0%

Use ARROW KEYS
to set value.
Press SELECT
to continue.

   Single Setpoint Screen

MAIN MENU

BOOST

HELP

PROGRAM

SET  TEMP

SET  TIME

SET AQUAPURE

PDA OPTIONS

SYSTEM   SETUP

SET AQUAPURE

SET  POOL TO  0% 

SET SPA TO   0% 

Highlight an item
and press SELECT

   Dual Setpoint Screen

PDA OPTIONS

SET AUTO-OFF
BACKLIGHT
ASSIGN HOTKEYS

Choose setting
and press SELECT.

MAIN MENU

HELP

PROGRAM

SET  TEMP

SET  TIME

PDA OPTIONS

SET AUTO-OFF

2 MINUTES

5 MINUTES

10 MINUTES

Use ARROW KEYS

to set value.

Press SELECT

to continue.

SYSTEM   SETUP

Содержание AquaLink RS













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды